Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Paul K on 02 December 2008, 11:53:10

Title: ECU Problems
Post by: Paul K on 02 December 2008, 11:53:10

I have a Omega 2.5 CDX with a burnt out ECU and the harness stocket. I have got a replacement ECU from my local breakers and now I trying to find a relacement harness. Can any one help providing the ECU is OK and I get a harness will they work or will I have a problem with the coding?  :( :-[

Title: Re: ECU Problems
Post by: Marks DTM Calib on 02 December 2008, 11:55:24

Quote

I have a Omega 2.5 CDX with a burnt out ECU and the harness stocket. I have got a replacement ECU from my local breakers and now I trying to find a relacement harness. Can any one help providing the ECU is OK and I get a harness will they work or will I have a problem with the coding?  :( :-[

Burnt out!

You will also need the immobiliser unit (fitted around the ignition barrel), key transponders and idealy the security code from the donor.

Its worth considering replacing the whole engine loom rather than just splicinga  new connector in, if you do this then get a loom from a car of th same age as some of the sensor connectors were different shapes.

Title: Re: ECU Problems
Post by: MutantCav on 02 December 2008, 12:19:01

What year car do you have and what is your location?? Probably have all you need here mate...