Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: waspy on 12 December 2008, 16:28:00

Title: What springs to get for DTi
Post by: waspy on 12 December 2008, 16:28:00

Am i correct in thinking that there are different suspension springs for the 2.2, 2.6, 3.2 etc? I guess the springs will be the same on the back for all models.
Could someone advise me as which ones to get for my 2.2DTi please? If they do any at all :-/ I would like to lower it by 40mm if this is possible?

Posted here, because i thought this would be the place. Please move if wrong :y

Title: Re: What springs to get for DTi
Post by: stevief on 12 December 2008, 16:33:04

Eibach fitted to my estate give abot 30mm drop at rear and 40 at the front which is due to the heavier engine as they quote 30 front and back.
 
Made a fair difference to the handling.

Steve

Title: Re: What springs to get for DTi
Post by: waspy on 12 December 2008, 16:44:51

Thanks matey. I'll keep a look out for some of those :y

Title: Re: What springs to get for DTi
Post by: Martin_1962 on 12 December 2008, 16:52:40

http://www.motorsportworld.co.uk/detProd.asp?ProductCode=E6532-140&PID=885883

Title: Re: What springs to get for DTi
Post by: waspy on 12 December 2008, 16:56:34

Quote

http://www.motorsportworld.co.uk/detProd.asp?ProductCode=E6532-140&PID=885883

Thanks Martin  :y :y