Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: lou on 14 December 2008, 17:34:29

Title: Headlight Adjustment
Post by: lou on 14 December 2008, 17:34:29

Hi all, I am trying to raise the beam of driver's headlight by adjusting to the 2 screws (Remenbering the No of turns) on top of the headlight, but nothing is changing. the long screws also seem to turn some white button at the back of the light. Any ideas...help much appreciated. (2.5 V6 mini facelift) :)

Title: Re: Headlight Adjustment
Post by: Pitchfork on 14 December 2008, 18:22:11

Sound to me like an adjuster inside the headlamps has disintegrated (a very common problem for which the only real remedy is a new headlamp) :(

Title: Re: Headlight Adjustment
Post by: MutantCav on 14 December 2008, 20:17:52

It takes a lot of turns to go a very short distance...but may as said be broken adjuster...its common

Title: Re: Headlight Adjustment
Post by: HerefordElite on 14 December 2008, 20:37:10

Quote

It takes a lot of turns to go a very short distance...but may as said be broken adjuster...its common

very fine pitch thread to adjust - i used a hex drive in a battery drill when i had to adjust mine from scratch ;)