Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: senny1427 on 15 December 2008, 14:03:52

Title: Multiram
Post by: senny1427 on 15 December 2008, 14:03:52

Checked yesterday and have found that the actuator on the front does not work... All the pipes are connected and OK, have also disconnected it and sucked(mmm) the pipe and it works so it is not the actual actuator itself... Any ideas

Title: Re: Multiram
Post by: TheBoy on 15 December 2008, 14:33:51

Quote

Checked yesterday and have found that the actuator on the front does not work... All the pipes are connected and OK, have also disconnected it and sucked(mmm) the pipe and it works so it is not the actual actuator itself... Any ideas

Could this be related to your other vac problems?

Title: Re: Multiram
Post by: Essex_Andy on 15 December 2008, 16:02:57

Check all vac pipes are sound and fit tightly onto the servo hose.

I used small cable ties to ensure a sealed fit

Title: Re: Multiram
Post by: senny1427 on 15 December 2008, 16:12:47

Could be, think i am going to have to take the plenum off and 100% check the lot. Good idea with cable ties will do that too...