Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Omega man 2 on 01 January 2009, 16:47:37

Title: 4 pot sump
Post by: Omega man 2 on 01 January 2009, 16:47:37

Hi
Does anyone know an easy way to remove the bottom part of the sump on a 2.0?

The destructions says to support the engine on a hoist and remove the subframe :o to access the bolts. There has to be an easier way? I don't want to shell out renting in engine hoist to lift the engine an inch for 5 mins ::)

Title: Re: 4 pot sump
Post by: ngrainqey on 01 January 2009, 17:16:21

you should beable to get the sump off without lifting the engine up, the most you'd need to lift it was a couple of inches on one side with just a trolley jack

Title: Re: 4 pot sump
Post by: Omega man 2 on 01 January 2009, 17:49:31

1. Remove sump
2. Replace piston rings
3. ????
4. Profit