Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: tink11 on 07 January 2009, 12:49:43
-
I have a 3.0 litre v6 omega elite automatic, the handbrake cable has snapped. I know that it is ok without a cable as its an auto but does anyone know if its easy to fit a new one.
-
Easy enough. An aftermarket cable should cost you about 20 quid (very expensive from Vx).
-
Thanks for your help
-
OE CABLE £31.96 + VAT ON TRADE CLUB
ANDY
-
Its not OK to keep using without handbrake. Remember, its an MOT failure ;)
I suspect you have not been using handbrake much, hence its seized, then snapped when you did try ;)
-
Its not OK to keep using without handbrake. Remember, its an MOT failure ;)
I suspect you have not been using handbrake much, hence its seized, then snapped when you did try ;)
So's a side light/atil light etc, but it's still drive & stopable! :y :y :y ;)
-
Its not OK to keep using without handbrake. Remember, its an MOT failure ;)
I suspect you have not been using handbrake much, hence its seized, then snapped when you did try ;)
So's a side light/atil light etc, but it's still drive & stopable! :y :y :y ;)
You'll still get pulled for it though ;) (not that you will for a handbrake, unless you make a idiot of yourself on a steep hill, trying to do a hill start)
-
.....
unless you make a thingy of yourself on a steep hill, trying to do a hill start)
As said many times before .... that's why you have two feet! Is it possible to opps up a hill start in an auto? ::) ::) :y
-
Buy a pattern part, the Vx price is stupidly expensive (thier parts having being going up to the point of not being competitive just recently!).
e.g.:
http://shop.ebay.co.uk/items/?_nkw=omega+cable+hand+brake&_sacat=0&_fromfsb=&_trksid=m270.l1313&_odkw=omega+cable&_osacat=0