Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Martin_1962 on 13 January 2009, 11:59:12
-
Mine are on their way out.
Do I replace whole arms or just bushes?
Which Ebay ones are worth having?
Is the MDTM rig working?
-
The bushes were worn and warped both sides. Mark had a look at them and advised me to replace the whole arm both sides. Did it with a mate not too much trouble at all really just followed the guide.
On Marks reccomendation i got mine from sutton auto factors but they have an online shop www.buypartsby.co.uk Cost me about £50 all in so not to bad really was quoted £230 by Vauxhall
hope this helps
-
Thanks
Hoping to use paypal if possible (got the moeny in there)
-
They take paypal and I way as well get them in advance
-
iggy 22 on here ordered a load for a few people from Meyle http://www.wulfgaertner.com/Home/description.asp?lan=en&images=&de=30713069069&ma=84
39 a set for the car iirc. Pressed into an old pair of wishbones by Mr dtm with his press and drifts then fit as normal. The bushes i beleive are BMW items so hopefully better than gm.
But as you say, i think the press is bust.
-
hiya martin, i have some ebay oe spec ones that i didnt bother fitting to the old one that needed them but they cost me 65 pounds plus postage... make me an offer maybe? say 50 with postage in? maybe 40 ;)