Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: davesink on 16 January 2009, 19:37:33

Title: ABS Diagnostic Connector
Post by: davesink on 16 January 2009, 19:37:33

Could anyone tell me where it is, which pins to short & the codes

Title: Re: ABS Diagnostic Connector
Post by: Marks DTM Calib on 16 January 2009, 19:48:41

Omega ABS setup will not flash codes out....

Title: Re: ABS Diagnostic Connector
Post by: Andy B on 16 January 2009, 19:52:31

Quote

Omega ABS setup will not flash codes out....

Why's that? Will it flash out codes for anything else?
Senator's could flash outcodes for various things alarm, suspension etc but nothing in the diagnostic conector for the ABS  :(

Title: Re: ABS Diagnostic Connector
Post by: Marks DTM Calib on 16 January 2009, 19:58:53

Quote

Quote

Omega ABS setup will not flash codes out....

Why's that? Will it flash out codes for anything else?
Senator's could flash outcodes for various things alarm, suspension etc but nothing in the diagnostic conector for the ABS  :(

Older setups with ALDL connector could flash certain codes from some subsystems.....Omega is ISO basd and hence requires a request sending before a code will flash out (with the exception of the engine)

Title: Re: ABS Diagnostic Connector
Post by: Andy B on 16 January 2009, 20:02:37

Quote

........Omega is ISO basd and hence requires a request sending before a code will flash out (with the exception of the engine)

Oh?  :-?   Good job I have my Cheapo TechII then :y  :y