Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: blue_dream on 18 January 2009, 23:41:00

Title: camber settings
Post by: blue_dream on 18 January 2009, 23:41:00

hi guys,
            alot of you take your omega to a company called wheels in motion for camber settings, does anyone know of a similiar place near to me Rushden, northants

                     ;)

Title: Re: camber settings
Post by: feeutfo on 19 January 2009, 00:19:23

dont know your nearest myself but you could try the oof map. Pm Albatross for the password.(i think) although i havent seen him on here for a while. Hth

Title: Re: camber settings
Post by: Turk on 19 January 2009, 00:28:01

Most accident repair centres of a decent standard will have Full Geometric Set-Up capability. Look for an insurance company approved centre in your area.

Title: Re: camber settings
Post by: Jimbob on 19 January 2009, 07:47:15

It's only an hour ish from you?

Most who have been will say it is worth the trip.

It is not just having the equipment, but knowing and understanding both it, and the car being measured / adjusted.

The 'factory' settings the the omega will not give a nice ride, WIM use some slightly different settings which will transform the car.

Many of us have travelled a loooooong way for their expertise.
I have done it twice, Hotel21 has done it from Scotland!

I would make the trip, I don't think you will regret it, I have wasted so much time in the past at local places, who havent been able to get a car right :(

Title: Re: camber settings
Post by: TheBoy on 19 January 2009, 09:24:28

I agree, loads of places - independents and dealers - had tried to sort out my MV6, unsuccessfully.  WIM used to be in Watford, so 1:30-2:00hr from here, but they sorted it on first trip, can transformed, tyre wear consistent.

Definately worth the trip, but you do need to book.