Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Bumbazor on 26 January 2009, 19:04:21
-
Does anyone here have a pic of what the ducting looks like?
I'm retro-fitting to my car and so far have the motors in ok but now I need the ducting.
If not I can make some up as I think the outlet is from the round hole on the motor up to the door pin area. But what is there (if anything) for the inlet which is at the bottom of the door?
-
the air is sucked in thru the smaller opening on the motor casing, so no ducting for intake,
I have 2 ducts here in the garage that I can dig out to get a pic of, doubtfull you will be able to make something up as the space between door card and door is tight.
-
Ok a pic would be great, thanks.
Would you consider selling yours?
-
I would have done if I hadnt found a use for them in the estate car, anyone breaking a 95-96 elite on here should have them tho
will sort pics when I get home from work :y
-
I would like to see a picture as well please . I have the ducting for inside the door and the fan unit but not sure how the air is taken in and out what do I need :question
-
LFF64 if you have the ducting then the pic I will be taking is of no use to you, im only taking a pic of the actual ducting pipe for Bumbazor, not a pic of it installed. Not taking my door panel off just for a pic, sorry.
I wrote detailed instructions on fitting this kit a couple of weeks ago, have a search for rear demisters, it should come up.
cheers :y
-
No problem :y Any idea what it was called just tried rear demisters etc and could not see it :question
-
cant remmeber the thread title, as my guide was a reply to someone elses thread. if I come across it Ill let you know ;)
-
:y I will have another look when I get a bit more time , I should be working really anyway ::)
I am really interested in holes in the door card if there are any ie how does the air get to the window and where does the fan pull the air in from :question :-/
-
Was it this http://www.omegaowners.com/forum/YaBB.pl?num=1232996661 ?
-
Was it this http://www.omegaowners.com/forum/YaBB.pl?num=1232996661 ?
thats this thread dude ;D
-
just having my tea then ill go get them to take a pic.
if I remember right, I may have 3 ducts, 2 of the same side
-
(http://i495.photobucket.com/albums/rr320/vauxfan2k/Dsc00629.jpg)
Yep I do have 2 of the near side ones, as you can see, very awkward to replicate the ducts.
air is sucked into the opening seen in the middle motor, the hole in the door is there to allow air to get to this, and the gap in the door card is sufficient enough to not block it
-
thats this thread dude
Cocks. So it is. I picked up the wrong link. Durrr.
Thanks for the pic. I can see the ducts are rather awkward.
Ive just found someone here who is hopefully sending me some, and hopefully will be fitting on Saturday.
-
did you change the rear door looms to elite looms? as the gls, cd, cdx dont have the connector for the motor. also pull the blank out of the dash where the switch goes to make sure the wiring is behind the switch :y
-
No, didn't change looms but I'll be adding my own wiring to come on same time as something else. Not sure whether to link up to front blower or rear heated. All my button spaces are taken up too so it's the simplest solution other than adding another switch somewhere.
-
I too have added rear demisters to my 99 CDX. I can confirm that the wiring is not there so I had to run my own. There was also no switch space in the centre consul switch bank so purchased a small rocker switch and LED from Maplins which I placed below the traction control switch to the left of the auto shiflt .