Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Raymienets on 13 February 2009, 10:48:11
-
Anyone got a diagram of how this sits in the caliper or advice. keeps falling out. cant go with the old one as that had crumbled.
-
the sensor clips into the top of the brake bad in between the spring clip, feed the wire out through the gap at the top on the caliper
-
the sensor clips into the top of the brake bad in between the spring clip, feed the wire out through the gap at the top on the caliper
Does the small metal bit fit in the hole of the spring on the brake pad, how does it sit in place
-
the sensor clips into the top of the brake bad in between the spring clip, feed the wire out through the gap at the top on the caliper
Does the small metal bit fit in the hole of the spring on the brake pad, how does it sit in place
yup, pushes in. Friction fit. If it falls out, its the wrong one for those pads
-
Cheers mate