Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: omegadti on 30 January 2009, 14:15:48

Title: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: omegadti on 30 January 2009, 14:15:48

I've finally suused out how to bridge the wiring to get the driver's memory seat to work in my CDX.   Didn't realise how easy it was from reading various posts but then I found a post with a photo of the control box and which wires to bridge - only 3 thin ones - one black and one red to live and one brown to earth - these are in the second plug from the left on the control box in the same plug as the thick red live and thick brown earth - I just connected into these and hey presto - working controls and memory buttons!!!!   Anyone needing more help please pm me

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: vauxfan2k on 30 January 2009, 17:11:23

theres a detailed how 2 inc picture on the yahoo group.

I just make a custom loom from the donor cars seat wiring, that plugs straight into the non memory seats loom. no bridging needed.

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: TheBoy on 30 January 2009, 22:38:55

There does appear to be a slight variation in colour coding on these wiring.  But the browns are always 0v (normally 2 for seats?), and there is 2 12v feeds - these will both be red, or a red and a black

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: PaulW on 13 February 2009, 14:06:18

Where abouts is the Yahoo group sorry? Could do with seeing the picture of this for sorting the seats out in my brothers GLS...

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: Martin_1962 on 13 February 2009, 16:02:49

Quote

theres a detailed how 2 inc picture on the yahoo group.

I just make a custom loom from the donor cars seat wiring, that plugs straight into the non memory seats loom. no bridging needed.

Better ask them to move their stuff to the forum - it was dead last time I looked.

I remember the exodus to a generic VX forum then another to OOF, leaving I suppose about 3 or 4 in the group.

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: markey mark on 14 February 2009, 20:11:29

bump up up for looknee an philliggy :y :y

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: philiggy on 14 February 2009, 20:34:28

Quote

bump up up for looknee an philliggy :y :y

Cheers :y

Phil

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: vauxfan2k on 14 February 2009, 22:11:33

I have the .doc file with the diagram on my pc, however I dont have office to convert the image to a jpg. Ill pm TB and see if he has a suggestion.

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: PaulW on 14 February 2009, 22:15:57

Email it me if you want :)

paulw "at" hardmilk "dot" com

 :y

Title: Re: Sussed Upgrading Drivers Seat to Elite Memory Seat
Post by: vauxfan2k on 14 February 2009, 22:16:52

pm already sent to tb, with any luck it can be put in the how 2 section  :y