Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: topdogkelv on 17 February 2009, 19:10:11

Title: 3.0 Manual mv6 clutch
Post by: topdogkelv on 17 February 2009, 19:10:11
hi guys can any one tell me if my facelift 3.0 mv6 has a hydrolic or cable clutch and where is the best place to get one cheap as mine has started slipping in forth and fifth gear
Title: Re: 3.0 Manual mv6 clutch
Post by: dbug on 17 February 2009, 19:11:13
Hey mate - sort your avatar size out please - far too big :o
Title: Re: 3.0 Manual mv6 clutch
Post by: MutantCav on 17 February 2009, 19:12:46
Manual on the 3.0, not drive by wire till the 2.6/3.2 engines...I have one here from a 2000 3.0 Mv6...
Title: Re: 3.0 Manual mv6 clutch
Post by: Entwood on 17 February 2009, 19:23:43
Post unreadable due to your avatar ...

site rules are 110 x 110 .. yours is 1024 X 768 !!!!!!!!!!!!!!!!!!!!!!!!!!!
Title: Re: 3.0 Manual mv6 clutch
Post by: topdogkelv on 17 February 2009, 19:27:55
yeh sorry guys god knows how i messed that up
Title: Re: 3.0 Manual mv6 clutch
Post by: topdogkelv on 17 February 2009, 19:38:41
Quote
Manual on the 3.0, not drive by wire till the 2.6/3.2 engines...I have one here from a 2000 3.0 Mv6...



so does that mean mine is a hydrolic clutch then and does that mean i got to replace the slave  
Title: Re: 3.0 Manual mv6 clutch
Post by: Andy B on 17 February 2009, 19:41:18
Quote
hi guys can any one tell me if my facelift 3.0 mv6 has a hydrolic or cable clutch and where is the best place to get one cheap as mine has started slipping in forth and fifth gear

It's hydraulic and shares the brakes' master cylinder reservoir, the feed is from the right hand side (as you're stood in front of the engine) of the reservoir
Title: Re: 3.0 Manual mv6 clutch
Post by: topdogkelv on 17 February 2009, 19:45:49
Any ideas on price as im on a tight budget as ive just moved house and was getting prices from £200 for clutch and £200 for the slave
thanks for your help andy  :)
Title: Re: 3.0 Manual mv6 clutch
Post by: MutantCav on 17 February 2009, 20:15:26
PM sent mate...