Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Olympia5776 on 18 February 2009, 19:17:11

Title: 4 cylinder cambelt DVD
Post by: Olympia5776 on 18 February 2009, 19:17:11

Bought it a year ago but just watched it in preparation to doing the belt on mine.
Is it only my copy that has barely audible voice during the complete job.
 Also at the end the engine is turned over by hand to check timing marks after one revolution ,  the right hand cam seems to have moved from the timing mark ,the tensioner is released and then the DVD finishes abruptly.
I presume the all the slack wasn't removed from the belt prior to initial tensioning but cant be sure due to the final editing ( or not ,as the case may be ).
Is it only this copy or are they all like that ?

Title: Re: 4 cylinder cambelt DVD
Post by: Loch View on 18 February 2009, 19:52:24

Bought mine last week and is exactly like yours

Title: Re: 4 cylinder cambelt DVD
Post by: MartinP on 19 February 2009, 21:56:24

I am sure there was a second DVD with not much commentary, but was in the OOf shop.

I got mine late last year and was one of the first.


JUST CHECKED, STILL IN THE SHOP :y

Title: Re: 4 cylinder cambelt DVD
Post by: TheBoy on 19 February 2009, 22:00:13

Quote

I am sure there was a second DVD with not much commentary, but was in the OOf shop.

I got mine late last year and was one of the first.


JUST CHECKED, STILL IN THE SHOP :y

There is only 1 version of the 4cyl one.  Its quite dark, and very quite commentry.

I'm secretly hoping that Mr DTM and Mr Hood will produce a better one for 4 pot owners...

Title: Re: 4 cylinder cambelt DVD
Post by: Marks DTM Calib on 20 February 2009, 08:09:42

We need a donor car to do the work on.

Title: Re: 4 cylinder cambelt DVD
Post by: TheBoy on 20 February 2009, 08:10:28

Quote

We need a donor car to do the work on.

cut 2 cylinders out of MikeDundee's car, he won't notice :P

Title: Re: 4 cylinder cambelt DVD
Post by: Loch View on 20 February 2009, 08:49:58

Mine needs done. I have the kit and the locks...just say when  ;D

Title: Re: 4 cylinder cambelt DVD
Post by: Raymienets on 20 February 2009, 09:42:16

Mines was the same, but managed to do the change without any problems. DVD gives you a step in the right direction if you watch it a couple of times. Definantly worth the £3.

Title: Re: 4 cylinder cambelt DVD
Post by: TheBoy on 20 February 2009, 11:36:55

Quote

Mine needs done. I have the kit and the locks...just say when  ;D

methinks you are a long way from Nottingham!

Title: Re: 4 cylinder cambelt DVD
Post by: Loch View on 20 February 2009, 11:38:02

me thinks that too....was worth a shot though  ;)