Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: blue_dream on 21 February 2009, 19:07:58

Title: fault code
Post by: blue_dream on 21 February 2009, 19:07:58

Hi everone
                Can someone please help, im still having trouble with my miggy, after changing cambelt im unable to get full power, i fault coded the system with my gunson tester (don't laugh) which brought up error code 74, something to do the air mass sencer being to high on volts, i have replaced crank sencer, no luck and disconnected the main battery, is their anybody in my area who could please help.  :( :( :( :( :'( :'(

Title: Re: fault code
Post by: TheBoy on 21 February 2009, 21:59:27

74 is maf, though often not the maf at fault, more likely an air leak...

Title: Re: fault code
Post by: feeutfo on 21 February 2009, 23:48:17

... or wiring to it. Is the plug fully home and no bare wires hanging out.