Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: ianph on 22 February 2009, 04:42:56

Title: 2.0 X20XEV crank sensor replacment?
Post by: ianph on 22 February 2009, 04:42:56

Is there a how to on this ?

I did check maintenance guide but couldnt find one for my motor.

Would someone be kind enough to explain how to do it or locate the link please?

Title: Re: 2.0 X20XEV crank sensor replacment?
Post by: TheBoy on 22 February 2009, 10:04:30

does it have a/c?

Title: Re: 2.0 X20XEV crank sensor replacment?
Post by: ianph on 22 February 2009, 19:58:21

Yes it has AC

Title: Re: 2.0 X20XEV crank sensor replacment?
Post by: Omega man 2 on 22 February 2009, 20:19:49

You need to remove the fan belt. Then undo the A/C compressor and move it out of the way.
Remove the bracket that the compressor is mounted on. Its held on by 4 bolts
1. behind the compressor,
2. near the exhaust manifold,
3.one through the engine bracket
4. Cant remember

The crank sensor is located between the Pas pump ans the A/c compressor right on the block.

Title: Re: 2.0 X20XEV crank sensor replacment?
Post by: star_whites on 22 February 2009, 21:01:29

It can be done without removing all that if you dont mind losing a bit of skin. Remove the dipstick pipe and get a 1/4 drive flexi ratchet and you can just get in to remove it.

Like I say though you do tend to loose a little bit of skin off your fingers  ;D