Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: slb on 01 March 2009, 15:43:47

Title: part codes
Post by: slb on 01 March 2009, 15:43:47

hi does any one out there know the part code numbers for the e10 e-tork (or star bolts) that hold the dis pack to its mounting bracket as two of mine were not in good con when they finaly had to admit i was determind to get them out and they gave up takeing some threads with them. :y :y

Title: Re: part codes
Post by: Darth Loo-knee on 01 March 2009, 15:47:50

8mm socket does the trick too ;)

think it is an E10

Title: Re: part codes
Post by: slb on 01 March 2009, 16:08:42

thnks i know what size is im after gm's part number so i can replace the knakerd ones :y :y

Title: Re: part codes
Post by: Entwood on 01 March 2009, 16:14:23

I think the OP wants the P/N of the bolts themselves .... not the size !!

There are several quoted for the 2.5 engine...

SCREW, M6 X 30, IGNITION COIL TO CARRIER (NLS.- USE 11093953)    (11093951)
  Note: RANGE: NO BREAKPOINT INFORMATION AVAILABLE

SCREW, M6 X 50, IGNITION COIL TO CARRIER    11099321
  Note: RANGE: NO BREAKPOINT INFORMATION AVAILABLE
 
SCREW, CSK., M10 X 25, IGNITION COIL CARRIER TO CYLINDER HEAD    11093991

HTH

Title: Re: part codes
Post by: slb on 01 March 2009, 16:17:33

thanks :y will have some fun in the parts dept at vaux will have to take one down to get them to match it up for me. ;D ;D :y :y :y