Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: John Lewis on 01 March 2009, 18:47:05

Title: Taking my 2L CDX to the scrappys, what do I keep?
Post by: John Lewis on 01 March 2009, 18:47:05
Been thinking about what I can nick off my old motor (2.0 CDX auto) before it gets scrapped. I have a 2.5 V6 (Reflection) now but what parts could be useful for me in future for replacements?

So far I'm taking out:
Cruise control (-->V6)
Speakers (spares)
boot badge (fleabay)
keys (fleabay, or keep).

(EDIT: MOVED KEY BIT TO NEW THREAD)
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: Dazzler on 01 March 2009, 20:24:18
Take the cat off and weigh it in seperate ;)
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: tmx on 01 March 2009, 20:32:41
And the Petrol!!!

Light Switch & the other switch gear?
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: Martin_1962 on 01 March 2009, 20:34:44
Interior

Doors if good

Engine if OK

Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: VXL V6 on 01 March 2009, 20:36:35
Wood trim if the new one hasn't got it.
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: PaulW on 01 March 2009, 21:11:11
Cable is different for the cruise control on the V6 compared to the 2ltr
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: Agemo on 01 March 2009, 21:17:55
Have you got a rear blind in your old one? Well worth swapping parcel shelves. Spare wheel. Always handy to have a central locking motor & a window motor. What are the alloys like? Mirrors are worth having, as spares or ebay. Can't think of owt else. ::)
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: John Lewis on 01 March 2009, 21:21:34
Interior: Storage is an issue so unsure about the seats etc, I don't have a garage and my cellar is a recording studio so no room! Although the interiors in very good nick apart from passenger seat's plastic pocket which has a scratch on it from some stray tip rubble. Is it worth just taking the door cards (perfect nick)?

Wood trim: all OK, but new one has graphite/black trim, which I prefer in all honesty.

Other bits: armrest latch broken, gaiters worn, glove box is fine.

Engines shafted I think. covered in oil too, pretty bad oil and minor coolant leak AFAIK. Battery OK.

Cat: I'm rubbish with mechanics but would have a pop at removing it...but I was  told by a mechanic the car needs to be driveable into the yard, is that misinformation?

Switch gear: yeah another good call.

3/4 doors are good, passenger rear has a botched trim repair where the last guy used a flat head screw to hold the trim on, WTF???  ;D

I'll re post the key bit as a separate thread.

Cheers guys, keep it coming!  :y
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: John Lewis on 01 March 2009, 21:23:23
Quote
Cable is different for the cruise control on the V6 compared to the 2ltr

Oh bugga, is it? I searched the site and harvested quite the opposite - that I'd only need a clutch switch. But I don't have a clue about it so would like to know more if poss. Ta
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: John Lewis on 01 March 2009, 21:24:54
Quote
Have you got a rear blind in you old one? Well worth swapping parcel shelves. Spare wheel. Always handy to have a central locking motor & a window motor. What are the alloys like? Mirrors are worth having, as spares or ebay. Can't think of owt else. ::)

No rear blind - spare, jacks etc I spose yeah defo. And youre right about the locking motor, I think my v6 one is a bit weak. Mirrors too aye I'll ave them!
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: PaulW on 01 March 2009, 21:29:18
Quote
Quote
Cable is different for the cruise control on the V6 compared to the 2ltr

Oh bugga, is it? I searched the site and harvested quite the opposite - that I'd only need a clutch switch. But I don't have a clue about it so would like to know more if poss. Ta

Bowden cable on the V6 is longer IIRC, rest of the kit (actuator, scruise switch) are the same.

Does your Reflection have a multiplug on the drivers-side suspension turret in the engine bay which isn't connected to anything??  Or hanging down the side??  If it does, then you have wiring for cruise, if not, then it's doubtful to have it...
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: Agemo on 01 March 2009, 21:31:09
If you're keeping the keys, you will need the "Tranponder ring" I think it is called, I am sure someone will advise about this.
CD player?
 ::)
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: PaulW on 01 March 2009, 21:33:14
Quote
If you're keeping the keys, you will need the "Tranponder ring" I think it is called, I am sure someone will advise about this.
CD player?
 ::)

Only need the ring if you're keeping the Engine ECU to sell elsewhere ;)
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: Agemo on 01 March 2009, 21:35:32
I stand corrected, - yet again! : )

Quote
Quote
If you're keeping the keys, you will need the "Tranponder ring" I think it is called, I am sure someone will advise about this.
CD player?
 ::)

Only need the ring if you're keeping the Engine ECU to sell elsewhere ;)
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: John Lewis on 01 March 2009, 23:06:28
PaulW: yeah the plug & wiring is present under the bonnet mate.
Title: Re: Taking my 2L CDX to the scrappys, what do I keep?
Post by: PaulW on 01 March 2009, 23:08:15
Should be fine then aslong as you can get the right length cable :)