Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: atkinsonomega on 24 March 2009, 22:56:38

Title: Need a cheap MAF sensor for 3.0 mv6 - Anyone help?
Post by: atkinsonomega on 24 March 2009, 22:56:38

Hi, I've had a few running problems with my MV6 as it's been cutting out, as I couldn't figure out the paper clip test I disconnected the MAF sensor and hey presto! it didn't cut out anymore. As when it's disconnected it doesn't cut out and when it's connected it does this must be the fault so I'm looking for a cheap maf sensor if anyone has one going it would be a great help, many thanks in advance.

Title: Re: Need a cheap MAF sensor for 3.0 mv6 - Anyone help?
Post by: feeutfo on 24 March 2009, 23:04:24

No first hand experience with this but have seen other members mention
Direct from Bosch

And via google
Autovaux
Vauxcentre
As you probably know GM are a bit steep.
Or a breakers, a couple on here, good lads they are too. Markey Mark and Mutant cav among others.
Hope helps a little. :-)

Title: Re: Need a cheap MAF sensor for 3.0 mv6 - Anyone help?
Post by: BettyBlu on 25 March 2009, 00:23:57

Failing that they have them here (I'm guessing this is the same part?)

http://www.vauxhallworldparts.com/partsearch/partdetail.php?linkid=7773&partid=482

Title: Re: Need a cheap MAF sensor for 3.0 mv6 - Anyone help?
Post by: markey mark on 25 March 2009, 11:33:01

i have a good second hand tested one here mate  :y

Title: Re: Need a cheap MAF sensor for 3.0 mv6 - Anyone help?
Post by: atkinsonomega on 25 March 2009, 13:03:40

How much you after for it?

Title: Re: Need a cheap MAF sensor for 3.0 mv6 - Anyone help?
Post by: webby23 on 25 March 2009, 16:31:49

Recently bought a replacement maf sensor (Only) for our 2.6..........bloke on ebay selling the part without the pipework for £30 but accepted an offer of £22.50........

Look on ebay mate if you have no luck on here