Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Glassback on 25 March 2009, 14:47:21

Title: Some more problems.
Post by: Glassback on 25 March 2009, 14:47:21

Hello, I replaced the drivers central locking motor last week, because it was fubar. But now it has started bouncing back off when I lock it with the key fob.It seems ok. when I use the key. Has any one got any ideas for a fix? The car is a face lift  cdx 2.2 dti. btw.

Title: Re: Some more problems.
Post by: mantahatch on 25 March 2009, 15:19:43

I had a similar problem when I fitted mine. I found there is a small amount of adjustment in the mounting screws of the solenoid/motor. And by moving it slightly it stopped the bouncing back open.

HTH

Mike

Title: Re: Some more problems.
Post by: Glassback on 25 March 2009, 19:27:36

Quote

I had a similar problem when I fitted mine. I found there is a small amount of adjustment in the mounting screws of the solenoid/motor. And by moving it slightly it stopped the bouncing back open.

HTH

Mike

Cheers Mike, can you tell me which way you moved it?

Title: Re: Some more problems.
Post by: Glassback on 26 March 2009, 09:59:30

Quote

Quote

I had a similar problem when I fitted mine. I found there is a small amount of adjustment in the mounting screws of the solenoid/motor. And by moving it slightly it stopped the bouncing back open.

HTH

Mike

Cheers Mike, can you tell me which way you moved it?

Thanks again Mike, Made an adjustment like you said, all sorted (for now)  :y