Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Tonka. on 25 March 2009, 17:19:19

Title: AR35 Gearbox
Post by: Tonka. on 25 March 2009, 17:19:19

Got my new gearbox. Thanks Loo-Knee and Marks DTM  :y

Can anyone (sassanach  ;)) tell me the part number for the sonnax thrust washer? Will be replacing this before fitting box.

When I tip the box forward, I get an amount of oil leaking from around the shaft inside the bell housing. Is this normal or does it need a new centre oil seal?

I can get a seal if i need onewhen I order the thrust washer  :y

Title: Re: AR35 Gearbox
Post by: Marks DTM Calib on 25 March 2009, 18:04:31

lol, that seals against the torque converter.

Title: Re: AR35 Gearbox
Post by: Tonka. on 25 March 2009, 18:06:11

Quote

lol, that seals against the torque converter.

I didn't know  ::)  Thanks Mark  :y

Title: Re: AR35 Gearbox
Post by: Marks DTM Calib on 25 March 2009, 18:22:27

This is the sonnax washer:

http://www.sonnax.com/instructions/54701-03K-IN.pdf

Part number 54701-03K

You also want a couple of seals.....which Sassanack might be able to advise on better than me!

Title: Re: AR35 Gearbox
Post by: Tonka. on 25 March 2009, 19:44:32

Quote

This is the sonnax washer:

http://www.sonnax.com/instructions/54701-03K-IN.pdf

Part number 54701-03K

You also want a couple of seals.....which Sassanack might be able to advise on better than me!

Thankyou, am on to Sassanack  :y

Title: Re: AR35 Gearbox
Post by: sassanach on 26 March 2009, 12:44:05

part no for sonnax washer is correct,part number for gasket is 96014973  and the o ring is 96017189. i would definately get the gasket but the o ring is optional(very rare that they leak)

Title: Re: AR35 Gearbox
Post by: Tonka. on 26 March 2009, 18:57:50

Thanks mate  :y