Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: mark.adams on 28 March 2009, 16:28:56
-
Where is it on a Z22XE engine and how easy is it to get to??
-
http://www.omegaowners.com/forum/YaBB.pl?num=1225024176
4th photo down bottom circle :y
-
http://www.omegaowners.com/forum/YaBB.pl?num=1225024176
4th photo down bottom circle :y
Thats the CAM sensor, crank is on the passenger side of the block towards the back iiic :-/
-
http://www.omegaowners.com/forum/YaBB.pl?num=1225024176
4th photo down bottom circle :y
Thats the CAM sensor, crank is on the passenger side of the block towards the back iiic :-/
Oops, misred the original post, have we got any pics of the crank sensor position?
-
yeah thats right i think its just before the flange for the gearbox to mount to.
-
Where is it on a Z22XE engine and how easy is it to get to??
Behind the A/C pump. Two ways to fit. 1) Remove exhaust heatshield in engine bay for better access (optional). Locate where dipstick tube goes into crankcase and it sits about 50mm towards the front of the engine. Held with one bolt but you`ll be working blind. 2) Remove aux. belt, unbolt pas pump and move away. Should give you enough clearance. :y