Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Christian on 29 March 2009, 09:44:29
-
the easiest task in the world and im stuck!
Ive fitted smoked side repeater's and the manufacturer that made them is abc designs.
There smoked , they have fitted in but dont seem to fit snug properly.
I noticed the repeaters are shaped theres a bigger ledge at the bottom of the repeater and a smaller one at the top thinking smaller ledge at top.
Theres no real easy way to explain this but its as tho they havnt been machined correctly to fit into the moulding 100 percent.
It may be becuase im fussy but could you post a few shots Close if poss) of your after market repeaters (pre facelift mini) so i can look.
As i say it may be just me being a total fuss pot because its hardely noticable!
-
yeah aftermarket things are very often out slightly, its due them just trying to use the original as a template, that why they get refered to as pattern parts. if you want 100% fit you'll have to stick to genuien items
-
Yea , its just me then, im bloody fussy as hell ;D
-
Jesus mate you think you are useless...........??
Just took me 2 and a half hours to change the glovebox handle on our MV6, what a bloody awkward horrible job to do......and obviously I had the obligatory screw left over after I had put it all back together again..........
GGGGGGRRRRRRRRRRRR.............
But at least its all sorted now and we can use the glovebox again....!!!!
:D