Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Mr Stud on 03 April 2009, 06:44:47

Title: cruise control wire
Post by: Mr Stud on 03 April 2009, 06:44:47
can't find the wire to plug into the clutch switch(have printed of the how to)...aarrgh.......

take it it would be there somewhere on a facelift mv6?
Title: Re: cruise control wire
Post by: Marks DTM Calib on 03 April 2009, 08:59:27
Yes, its normaly taped to the loom with the end being nearer the brake swicth
Title: Re: cruise control wire
Post by: Mr Stud on 03 April 2009, 10:36:51
Quote
Yes, its normaly taped to the loom with the end being nearer the brake swicth

do you have to be very flexible to get to it or can you remove the heater vent
Title: Re: cruise control wire
Post by: Marks DTM Calib on 03 April 2009, 10:39:38
Heater vent removal makes it a lot easier (and not hard to do)
Title: Re: cruise control wire
Post by: Mr Stud on 03 April 2009, 10:43:47
Quote
Heater vent removal makes it a lot easier (and not hard to do)

ok....how?
Title: Re: cruise control wire
Post by: Marks DTM Calib on 03 April 2009, 10:45:00
Need to check my notes, been doing a few Astra G/H's and Corsa's recently so need to get it right!
Title: Re: cruise control wire
Post by: Marks DTM Calib on 03 April 2009, 10:47:45
Yep.....

Remove footwell cover (you have probably already taken this off) and you will see a screw at the outer end of the plastic vent.

Remove this and you can then pull the vent assembly out (takes a bit of wiggling)
Title: Re: cruise control wire
Post by: Mr Stud on 03 April 2009, 11:11:29
Quote
Yep.....

Remove footwell cover (you have probably already taken this off) and you will see a screw at the outer end of the plastic vent.

Remove this and you can then pull the vent assembly out (takes a bit of wiggling)

cheers mate....

off to look........
Title: Re: cruise control wire
Post by: TheBoy on 03 April 2009, 13:12:28
Quote
Yep.....

Remove footwell cover (you have probably already taken this off) and you will see a screw at the outer end of the plastic vent.

Remove this and you can then pull the vent assembly out (takes a bit of wiggling)
Screw? Sure its not one of the 2 part plastic clips? Or am I thinking of Astras again...
Title: Re: cruise control wire
Post by: Mr Stud on 03 April 2009, 16:07:47
so what do i do with the wire(is it a white two pin plug).....as fitted the stalk,and all the bits in the engine but the cruise don't work....

did i have to change the brake pedal switch what in there with the one that came with the kit...

did take photos off everything but cant get them onto the computer....
Title: Re: cruise control wire
Post by: markey mark on 03 April 2009, 19:36:45
that two pin white plug just bridge it bud and yes you will need to fit the four pin brake switch  :y
Title: Re: cruise control wire
Post by: Mr Stud on 04 April 2009, 13:47:42
woohoo all done..... :) cruising here we come

that's two things i done now thanks to this site....

just got to sort out the knocking now......