Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: markey mark on 02 April 2009, 15:10:46
-
how do has any one got a picture of the battery connections on a 2.6 facelift ??? seem to have two wires with ring terminals on and carnt remember were they go ! :-[ :-[
-
carnt any one help ??? 3.2 will do :-/
-
I can take a pic tonight if that helps?
-
I can take a pic tonight if that helps?
cheers mark that would be spot on :y
-
Are these any use?
(http://i23.photobucket.com/albums/b394/Marks_DTM_Calib/Mick_Dundee/DSC00155.jpg)
(http://i23.photobucket.com/albums/b394/Marks_DTM_Calib/Mick_Dundee/DSC00156.jpg)
-
not really mate i have two ring terminals 6mm size on two lomg wires bound together and i dont know were they go one is brown the other is black ? do the facelifts have the earth wires on the rear lifting bracket like the pre facelifts ??? :-/
-
If you look at the 1st pic there is a black and brown bound and bolted to the 0v terminal. Is that not the same?
-
not really mate i have two ring terminals 6mm size on two lomg wires bound together and i dont know were they go one is brown the other is black ? do the facelifts have the earth wires on the rear lifting bracket like the pre facelifts ??? :-/
No, the 2.6 doesn't.
All the ECU 0V wires connect to the 0v point under the battery.....I will get a pic later for you.
-
not really mate i have two ring terminals 6mm size on two lomg wires bound together and i dont know were they go one is brown the other is black ? do the facelifts have the earth wires on the rear lifting bracket like the pre facelifts ??? :-/
Does the wiring look as though it's from the factory or from later 'add-ons'? :-/
-
that will it then must go to the earth on battery ! andy yep its deffo factory its in main engine loom :y