Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kingplym on 11 April 2009, 21:48:58

Title: vent selector failure
Post by: kingplym on 11 April 2009, 21:48:58

i cant seem to change the vent selector setting? it seems to be stuck on windscreen setting :P

any ideas? ;)

all help greatly needed :y

Title: Re: vent selector failure
Post by: miggcddave on 11 April 2009, 21:55:00

Quote

i cant seem to change the vent selector setting? it seems to be stuck on windscreen setting :P

any ideas? ;)

all help greatly needed :y

sounds like the pull cable has come off /snapped at the back of control knob :-/

Title: Re: vent selector failure
Post by: kingplym on 11 April 2009, 22:00:11

any idea how to mend? :-?

Title: Re: vent selector failure
Post by: kingplym on 12 April 2009, 15:50:40

any ideas anyone on a quik how to? :-/

Title: Re: vent selector failure
Post by: TheBoy on 12 April 2009, 16:54:18

M reg will be manual heating controls. Vac operated iirc, so check the engine vac pipes, then if no joy, start checking behind dash vac

Title: Re: vent selector failure
Post by: kingplym on 12 April 2009, 18:01:50

ok, thanx boy :y :y :y

Title: Re: vent selector failure
Post by: Boatboy on 14 April 2009, 09:23:37

Sorted that very problem this past weekend. As already suggested it was a vacuum problem.

Mine was a broken connection in the engine bay, where the small diameter Vac pipes are T'eed into the main brake servo pipe.

Steve

Title: Re: vent selector failure
Post by: kingplym on 14 April 2009, 15:10:10

thanx boaty il have a look at that :y :y :y