Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: hoj on 14 April 2009, 19:54:46
-
Thanks to all who suggested that my crank sensor had failed you were right got it fixed today and all is fine.
I just couldn't get my head round something working one minute then not the next over a six week period.
Plus i had had TWO machines plugged in without finding any faults as they couldn't get further into the system
My local garage today plugged in found the fault got the part fitted it and hey presto.
Thanks also to Andyb for the offer of getting a crank sensor for me but i needed to know it was 110% that and without a machine to plug in couldn't so hence the garage today all in one foul swoop
Thanks again ALL
-
Thanks to all who suggested that my crank sensor had failed you were right got it fixed today and all is fine.
I just couldn't get my head round something working one minute then not the next over a six week period.
Plus i had had TWO machines plugged in without finding any faults as they couldn't get further into the system
My local garage today plugged in found the fault got the part fitted it and hey presto.
Thanks also to Andyb for the offer of getting a crank sensor for me but i needed to know it was 110% that and without a machine to plug in couldn't so hence the garage today all in one foul swoop
Thanks again ALL
That's chicken feed isn't it? :D
-
Do you know how they have routed the wiring? If its routed the same as the original it will fail again at some point,too much heat for the wiring. :y
-
the guy has a meega himself just as i was about to tell him that he told me thats what he would do so its been done right
-
sorry pitchfork
fell, fowl, fal