Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: gsizoli on 16 April 2009, 20:23:11

Title: Seat belt indicator
Post by: gsizoli on 16 April 2009, 20:23:11

Hi Guys!

I've a simple question for you - I hope so.
In my facelift Omega I can hear a low beep when I pull out the driver's side seat belt.
How should this work?Should i hear this beep in case of both sides, or is it work only driver"s side?How can I make it loud - where can i found the used components - let it a relay,controller or anything?
Anyway the seat belt indicator is not lightning when I turn the ignition on, but I think i should only change the appropriate bulb in the dash.

It's not a big problem I know so I'm just interesting because I like if things are working properly in my car.
tx
Zoli

Title: Re: Seat belt indicator
Post by: Andy B on 17 April 2009, 18:49:24

Quote

Hi Guys!

I've a simple question for you - I hope so.
In my facelift Omega I can hear a low beep when I pull out the driver's side seat belt.
How should this work?Should i hear this beep in case of both sides, or is it work only driver"s side?How can I make it loud - where can i found the used components - let it a relay,controller or anything?
Anyway the seat belt indicator is not lightning when I turn the ignition on, but I think i should only change the appropriate bulb in the dash.

It's not a big problem I know so I'm just interesting because I like if things are working properly in my car.
tx
Zoli

It's not somerthing we have here in Bighty!  :-?  ;)

Title: Re: Seat belt indicator
Post by: Marks DTM Calib on 17 April 2009, 19:03:44

Heres the circuit diagram

(http://i23.photobucket.com/albums/b394/Marks_DTM_Calib/Maintenance%20Guides/Seatbeltwarningcircuit.jpg)

It would appear that only the drivers seat has the monitoring and that there is no volume adjustment (unless you take the buzzer apart!)

Title: Re: Seat belt indicator
Post by: gsizoli on 18 April 2009, 11:32:46

Thanks for the wire diagram.
Zoli