Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Sir Tigger KC on 20 April 2009, 14:43:29

Title: Removing front bumper
Post by: Sir Tigger KC on 20 April 2009, 14:43:29

Hi All,

I'm attempting to replace my front bumper.  I've removed the screws at the bottom of the wheelarch where the bumper is attached to the lining.  But the screws at the top of the wheelarch just go round and round! :(

Do they screw into a bracket? or are there knuts? Its difficult to see or feel up inside!  ::)

Cheers

Steve

Title: Re: Removing front bumper
Post by: the-toy-maker on 20 April 2009, 16:13:05

if i remember correctly they screw intometal clips! try a little leaverage behind the screw as you turn it!

hope this helps :)

Title: Re: Removing front bumper
Post by: Sir Tigger KC on 20 April 2009, 16:17:19

Thanks for that!

The next question is:- How do you remove the plastic pins on the top and underneath the bumper, without destroying them???  :-?

Title: Re: Removing front bumper
Post by: RobG on 20 April 2009, 16:34:20

Push the centre of the pin. With care!!!!!!!!!!!!!!!

Title: Re: Removing front bumper
Post by: Miggy24 on 20 April 2009, 16:41:10

take the grill out and take the headlight panels off that sit under the lights.then behide that theres another 2 screws then the screws on the archs and thats it :y