Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: duggs on 03 May 2009, 15:49:46

Title: Vac Reservoirs.
Post by: duggs on 03 May 2009, 15:49:46

I've used the fantastic Vac pipe diagram today to check a few things out BUT it didn't make one thing clear.

Does it matter which way in/out the vac pipes go into the Front and Rear Vac Reservoirs. ie: taking either, would it make an ounce of difference if I swap the two vac pipes around as they enter the reservoirs.

Tis just that my heating isn't very good, almost non- existant. The pipes under the steering column BOTH get Hot when the heater is on, just doesn't get very warm through the vents in the cabin.

Title: Re: Vac Reservoirs.
Post by: ScottieMV6 on 03 May 2009, 15:52:52

Have you flushed out the heater matrix.

Worked for me. Take both pipes off that go into the bulkhead on the drivers side. Stick a hose pipe in one for a few minutes then the other for a few minutes. Repeat this until the water runs clear then replace both pipes.  :y

Title: Re: Vac Reservoirs.
Post by: duggs on 03 May 2009, 17:06:01

Done it...got the T Shirt...several T Shirts to be honest. Both pipes running through the bulkhead are hot...just sod all coming through the vents.