Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: unlucky mark mv6 on 04 May 2009, 15:15:41

Title: rocker cover bolts.
Post by: unlucky mark mv6 on 04 May 2009, 15:15:41

I have oil seeping from a couple of the rocker cover bolts on my 3.2.Can you replace the rubber o-rings which im led to believe it is,and do you have to strip everything,or just take the bolt out.

Title: Re: rocker cover bolts.
Post by: Bent valve on 04 May 2009, 15:26:45

 The o rings are under the cover. you would have to remove them which would also mean replacing the gaskets.

Title: Re: rocker cover bolts.
Post by: feeutfo on 04 May 2009, 15:29:11

try re torquing to 8nm (not a penny more mind) i had a couple weep and they where loose. Do NOT over tighten.

There is a guide in maintenance re cam cover gaskit and o poing replacment. It involves removing plenum etc.