Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: tmx on 05 May 2009, 01:14:20
-
Just Curious to know
-
Manifold Absolute Pressure sensor?
-
No, it uses the faster MAF based measurement setup
-
Cheers mark thats another dead MAF sensor again then engine running to rich! no faultrcodes yet....
-
Cheers mark thats another dead MAF sensor again then engine running to rich! no faultrcodes yet....
not convinced, as rich running should be detected and trimmed back once the emissions goes closed loop. Unless it cannot trim it any further.