Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Dave Elite on 05 May 2009, 22:55:01

Title: Camber
Post by: Dave Elite on 05 May 2009, 22:55:01

Can anyone explain where the front camber is adjusted? I have done the discs and pads and also the wishbones, but I couldn't see how it could be done. I am going to get it checked by a pro, but just out of interest. Thanks in advance Dave

Title: Re: Camber
Post by: Turk on 05 May 2009, 23:10:46

It's via the two bolts at the bottom of the each strut.  Needs to be done with the right equipment as just a smidge out will cause issues.

Properly done the car will be spot on to drive. :y

Title: Re: Camber
Post by: Dave Elite on 05 May 2009, 23:14:43

Quote

It's via the two bolts at the bottom of the each strut.  Needs to be done with the right equipment as just a smidge out will cause issues.

Properly done the car will be spot on to drive. :y

Thanks, I just wanted to know. Thanks