Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: andy wood on 07 May 2009, 13:11:19

Title: FAULT CODES
Post by: andy wood on 07 May 2009, 13:11:19

Hi all

I have taken my Omega in for a service.
It wouldn't start a couple of weeks back (turned over but not firing) and RAC man said it was fuel relay but garage have said more likely to be crankshaft or camshaft sensor.
Garage have come up with a fault code on their reader of 31,  to do with rpm signal but their reader does not tell you where the fault is.

Can anybody help please.

ANDY  :)

Title: Re: FAULT CODES
Post by: Andy B on 07 May 2009, 13:18:54

Quote

Hi all

I have taken my Omega in for a service.
It wouldn't start a couple of weeks back (turned over but not firing) and RAC man said it was fuel relay but garage have said more likely to be crankshaft or camshaft sensor.
Garage have come up with a fault code on their reader of 31,  to do with rpm signal but their reader does not tell you where the fault is.

Can anybody help please.

ANDY  :)

IIRC 31 is the code you get when your engine is NOT running.  ;)

Title: Re: FAULT CODES
Post by: tmx on 07 May 2009, 14:07:50

yeah 31 means engine not running

Hope it aint Exminster Garage ??

Title: Re: FAULT CODES
Post by: andy wood on 07 May 2009, 14:32:45

thanks for replies,
so can you shed any light on the intermittent starting could it be fuel relays or somehting else

p.s. no it's not Exminster garage. lol
cheers

Title: Re: FAULT CODES
Post by: MutantCav on 07 May 2009, 14:36:34

V6 so will be crank sensor most likely...use genuine Vaux and route as away from exhaust and oil cooler pipes as poss :y