Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: kingplym on 08 May 2009, 18:25:00

Title: changed hbv, but.......
Post by: kingplym on 08 May 2009, 18:25:00

my lovely little lady treated me to a new hbv in these times of unempluyment for me

anyway, i took off the plenumn and changed me hbv, ha easy!, not.

put the plenumn all back together, i think, started the engine and the idle shot up to 2000 rpm, the usual most is 1500 rpm? after a few mins i manully pushed the throttle linkage back down and now it seems fine

any one have any ideas what happened as im slightly worried :-[ :-[ :-[

Title: Re: changed hbv, but.......
Post by: tmx on 08 May 2009, 18:56:32

it is weasy i didnt remove the plenum!

throttle cable may of been abit slack???

is it ok now??

Title: Re: changed hbv, but.......
Post by: kingplym on 08 May 2009, 19:13:59

im waiting for the engine to cool so i can cold start it again, as it happens the throttle cable was in a different location to normal and i did put back in its usual position.

fingers crossed, and all other crossables :D ;) :y