Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Jonah8742 on 09 May 2009, 00:36:21

Title: comerecial mods?
Post by: Jonah8742 on 09 May 2009, 00:36:21

when i am buying mods from companies, such as ones in total vaux mag.. do i need to buy vectra parts as omega are almost never listed? would the fit or would i need to do adaptations??

Title: Re: comerecial mods?
Post by: damon80 on 09 May 2009, 00:38:45

Depends what sort of mods you're looking at??

Title: Re: comerecial mods?
Post by: Jonah8742 on 09 May 2009, 00:44:18

engine pipes, air intake, springs that sort of stuff?

Title: Re: comerecial mods?
Post by: tmx on 09 May 2009, 00:50:03

vectra & omega are completely different suspension wise

The 2.5 v6 vectra engine is the same block as a omega 2.5 but has a different inlet manifold

some interrior bits are the same but thats as about as far as it goes :(

Title: Re: comerecial mods?
Post by: Jonah8742 on 09 May 2009, 00:53:27

so any suggestions on where to get omega mods like those?

Title: Re: comerecial mods?
Post by: tmx on 09 May 2009, 00:59:36

eBay
e
irmscher make aftermarket styling for the omega but it costs £££

The omega isnt in with the boy racers so theres not much availible for it max power bodykit wise

lowering kits do exist Eibach do one but again its £££

i wouldnt play around with the engine much the air intake is more than ample and an induction kit will just kill the Airflow sensor

i notice you have a 2.5 so heres an instant 22bhp! get some 3.0 Cams & a 3.0 inlet divider :y

Title: Re: comerecial mods?
Post by: Jonah8742 on 09 May 2009, 02:00:56

well i just bought a 2.0 just to play around with so i was just looking for loads of stuff for it, make it really unique.

Title: Re: comerecial mods?
Post by: Martin_1962 on 09 May 2009, 09:24:03

Mods for the 2.0

Lowering springs - Eibach
Body kit parts Ebay - Irmscher, and pattern parts
Engine mods Z22LET - V6 - start with aV6 - easier

My 2.6 has a few alterations, and will be getting fitted with 3.0 cams in two weeks time, 1 head is already ported.

Title: Re: comerecial mods?
Post by: M0T0RVATE on 09 May 2009, 10:36:39

Quote

when i am buying mods from companies, such as ones in total vaux mag.. do i need to buy vectra parts as omega are almost never listed? would the fit or would i need to do adaptations??

Here are a few sites listing various Omega B mods etc...

http://www.lmfvauxhall.co.uk

http://www.steinmetzdirect.com

http://www.arjo-tuning.de   listed as Opel

http://www.eurotuning.biz   listed as Opel

http://www.racelook.de   type Omega B in searchbox

Hope these help and are of interest...

 :) :y