Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: omegav6est on 07 May 2009, 22:43:38

Title: leccy seats
Post by: omegav6est on 07 May 2009, 22:43:38

hi all my mig has a seat with only 1 electric function,the up and down bit, i have the chance of a elite interior which has a multi function seat, im not worried about the wing mirror memory thing but can i fit this to my mig and get it to work easily enough? thanks

Title: Re: leccy seats
Post by: GG on 07 May 2009, 22:48:30

I know others have succesfully fitted without problems, from memory the the general power supply wire is the same, it only gets clever in the seat itself, I think, will check tomorrow  :y

Title: Re: leccy seats
Post by: omegav6est on 07 May 2009, 22:49:59

thanks kick the mule.

Title: Re: leccy seats
Post by: GG on 07 May 2009, 23:05:53

Just checked mine with a torch. I got two power feeds
1. for the heated seats
2. to the clever box that does the multi function seats

Check this to be sure
http://www.omegaowners.com/forum/YaBB.pl?num=1234703021

 :y :y

Title: Re: leccy seats
Post by: omegav6est on 07 May 2009, 23:28:28

so hopefully when i connect my power feed to the new seats the little box o tricks underneath should do the rest...sweet.

Title: Re: leccy seats
Post by: Darth Loo-knee on 07 May 2009, 23:40:03

You can also put in the plug and solder three further wires and hey presto  :y

Title: Re: leccy seats
Post by: omegav6est on 08 May 2009, 00:18:47

can you explain that loo-knee?

Title: Re: leccy seats
Post by: omegav6est on 10 May 2009, 09:59:42

ooops sorry i meant can youexplain that Jedi Master Scrote Scratcher

Title: Re: leccy seats
Post by: nixoro on 10 May 2009, 11:11:23

Hi

Assuming yours is an earlier omega should be the same

I fitted leather to my old mig

I was lucky enough when fitting the drivers seat to have a piece of loom with the connector that connects in under the seat if you can its just a case of snip the original connector for the up/down and using a nylon connector(?) join the loom with connector to original wiring and hey presto sorted.

The rest of the seats just wire in as normal

hth

Roy :y