Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: unlucky mark mv6 on 18 May 2009, 19:22:00

Title: How to
Post by: unlucky mark mv6 on 18 May 2009, 19:22:00

Dont suppose there is a how to on here to move the lamba sensors on the 3.2 by anychance is there?. :)

Title: Re: How to
Post by: TheBoy on 18 May 2009, 19:23:37

Quote

Dont suppose there is a how to on here to move the lamba sensors on the 3.2 by anychance is there?. :)

nope

Title: Re: How to
Post by: unlucky mark mv6 on 18 May 2009, 19:26:39

That answers that then. :-X

Title: Re: How to
Post by: TheBoy on 18 May 2009, 19:28:58

simple and to the point ;D. I could have waffled it up a bit I suspect, but I've been playing wankword bingo all day at work, so bored of that ;D


So, no, we haven't got one  :'(, but if you fancy doing one when you modify yours....    ;)

Title: Re: How to
Post by: unlucky mark mv6 on 18 May 2009, 19:36:51

Good idea,might just do that mate. :y

Title: Re: How to
Post by: Lazydocker on 18 May 2009, 19:55:31

Quote

simple and to the point ;D. I could have waffled it up a bit I suspect, but I've been playing wankword bingo all day at work, so bored of that ;D


So, no, we haven't got one  :'(, but if you fancy doing one when you modify yours....    ;)

;D ;D ;D ;D ;D ;D ;D

Been one of those days has it? :-? :-? :-?

Title: Re: How to
Post by: kcl on 18 May 2009, 21:20:20

But someone here did that job and had even some drawings where the new places were put etc...? Or have i been dreaming... again... :D

Title: Re: How to
Post by: Welung666 on 18 May 2009, 21:33:48

Quote

Good idea,might just do that mate. :y

Shall I fire up my welder Mark? You take the pics and we'll write one up :y

[edit]I'll do the 2.2 downpipe at the same time and as I'm ordering a lug and plug I might as well order a handful :y[/edit]

Title: Re: How to
Post by: Andy B on 18 May 2009, 23:21:38

Quote

But someone here did that job and had even some drawings where the new places were put etc...? Or have i been dreaming... again... :D

Wasn't it on MarksDTM rebuild of MikeDundee's car?  :-/

Title: Re: How to
Post by: VXL V6 on 18 May 2009, 23:26:57

Albatross has posted up a TIS diagram with arrows pointing to where the sensors should be moved too.

Title: Re: How to
Post by: unlucky mark mv6 on 19 May 2009, 13:43:06

Quote

Quote

Good idea,might just do that mate. :y

Shall I fire up my welder Mark? You take the pics and we'll write one up :y

[edit]I'll do the 2.2 downpipe at the same time and as I'm ordering a lug and plug I might as well order a handful :y[/edit]

Might be a good idea mate,let me know how much you charge and how much the bits will be,eml beginning to p**s me off. :y

Title: Re: How to
Post by: Welung666 on 19 May 2009, 14:14:24

Quote

Quote

Quote

Good idea,might just do that mate. :y

Shall I fire up my welder Mark? You take the pics and we'll write one up :y

[edit]I'll do the 2.2 downpipe at the same time and as I'm ordering a lug and plug I might as well order a handful :y[/edit]

Might be a good idea mate,let me know how much you charge and how much the bits will be,eml beginning to p**s me off. :y

I'll just charge you cost on the parts, the labour can go into the HowTo ;) ;D

Title: Re: How to
Post by: unlucky mark mv6 on 19 May 2009, 14:16:43

Nice one bud,let me know when,and obviously i will always help you with yours. :y