Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: drefts on 02 May 2009, 23:09:53

Title: ar35 from omega a to omega b
Post by: drefts on 02 May 2009, 23:09:53
would a omega a 3.0 24 93.mod AR35 autobox fit in a omega b 2.5dt 95.mod with a ar25 box? i could get a box with conv and control box. anything more i need?
Title: Re: ar35 from omega a to omega b
Post by: MutantCav on 02 May 2009, 23:12:08
Gearbox should be the same but you will need to use your current torque converter and bellhousing
Title: Re: ar35 from omega a to omega b
Post by: drefts on 02 May 2009, 23:39:40
ok. so i can't use the converter from it. thanks for real fast answer.
Title: Re: ar35 from omega a to omega b
Post by: Turk on 03 May 2009, 02:21:44
Just splitting hairs, but the Omega A is the Carlton. In Europe the Carlton was called the Omega.
All the Omega's as we know them are Omega B's ('94>'03).  :y
Title: Re: ar35 from omega a to omega b
Post by: Omegatoy on 03 May 2009, 07:54:46
Nope!!! although it will physically fit, the managemnent systems are not compatible, where the omega a dipstick is on the b it is full of electronic connectors, it would just go into limp and nothing you could do would change it!! sorry dude,mind you the omega must have done a few miles  anyway, td wold kill it im sure!!
Title: Re: ar35 from omega a to omega b
Post by: VXL V6 on 03 May 2009, 12:36:51
As above! Plus all the connectors are different anyway.
Title: Re: ar35 from omega a to omega b
Post by: drefts on 04 May 2009, 22:28:21
sorry, i know it is called Carlton but didn't think when i wrote.  ;D.
so in other words, there is no hope to mount a auto box from a Carlton in omega b... :'(
then i still have to look, was much easier too find one from Carlton  ;)
Title: Re: ar35 from omega a to omega b
Post by: stevie1976 on 04 May 2009, 22:34:15
as above connections will not fit :y
Title: Re: ar35 from omega a to omega b
Post by: drefts on 24 May 2009, 13:00:53
Ok. know i have a omega ar35 from a mv6 3.0. 98.mod will this fit right in to my omega 2.5td 95? and what do i need to takeover?
Title: Re: ar35 from omega a to omega b
Post by: TheBoy on 24 May 2009, 13:29:07
Quote
Ok. know i have a omega ar35 from a mv6 3.0. 98.mod will this fit right in to my omega 2.5td 95? and what do i need to takeover?
bellhousing and torque converter from the td
Title: Re: ar35 from omega a to omega b
Post by: drefts on 24 May 2009, 14:05:45
Quote
Quote
Ok. know i have a omega ar35 from a mv6 3.0. 98.mod will this fit right in to my omega 2.5td 95? and what do i need to takeover?
bellhousing and torque converter from the td

how about ecu for autobox and gearchanger
Title: Re: ar35 from omega a to omega b
Post by: MutantCav on 24 May 2009, 14:07:18
Sorry for some reason I was thinking very early Omega (94/96) for Omega A...Carltons different...

94 Omega onwards Auto box will be usable though :y
Title: Re: ar35 from omega a to omega b
Post by: Omegatoy on 24 May 2009, 18:13:45
Quote
Quote
Quote
Ok. know i have a omega ar35 from a mv6 3.0. 98.mod will this fit right in to my omega 2.5td 95? and what do i need to takeover?
bellhousing and torque converter from the td

how about ecu for autobox and gearchanger

nope td ecu will drive it just fine!! :y