Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: lou on 02 June 2009, 17:58:41

Title: Front brake pads
Post by: lou on 02 June 2009, 17:58:41

Perhaps this has been asked before but how do the pads fit into the caliper as one pad has a shim (metal plate on the back) but the other one has not. At the moment the one with the shim is on the piston side..opinions would be appreciated.

Title: Re: Front brake pads
Post by: JezInBrum on 02 June 2009, 18:31:35

As far as i know thta is the correct way round. Set i just fitted had them on all four. When replacing use copper slip as well as this helps reduce the chance of squealing brakes

Title: Re: Front brake pads
Post by: Andy B on 02 June 2009, 18:33:03

Quote

As far as i know thta is the correct way round. Set i just fitted had them on all four. When replacing use copper slip as well as this helps reduce the chance of squealing brakes

[size=18]ChrisGixer!!!!![/size]  ;D  ;D :y  :y  :y