Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Waglet on 23 May 2009, 16:00:15
-
I expect many owners have or have had this problem. 1994 CDX. The display has many "bits missing" and virtually unreadable. Is there a cure? Can it be replaced/repaired/changed. Thanks
-
I believe they can be repaired if you're very very good with a soldering iron. Best option is to replace, try ebay or one of the breakers on here :y
-
You do need to replace with one of the early unreliable ones though :'(
the later more reliable ones have different connectors
-
details of the types here :
http://www.omegaowners.com/forum/YaBB.pl?num=1153215782/1#1
-
I presume its a "dashboard out job"?
-
yes, but that is a lot easier than it looks, 10 minute job!
pop out centre airvents, couple of screws, one over steering wheel....
propper guide in the maint section.
-
I presume its a "dashboard out job"?
yup, easy though. guide in maint guides section
-
I expect many owners have or have had this problem. 1994 CDX. The display has many "bits missing" and virtually unreadable. Is there a cure? Can it be replaced/repaired/changed. Thanks
same problem on my 94 cdx but its still readable only a few pixels missing :y
-
will a vec B mid go in its place my older vec b 1997 had a yellow connector MID
-
The Yellow connector MID's can be replaced with the grey plug MID if you are good with a soldering iron and making up looms / modifying PCB's :y
-
How do you get at the screw if the steering column is fiexed? I.E. it does not have the lever to move it up and down etc. Thanks