Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: jim351 on 04 June 2009, 20:28:23

Title: Help with a fault code...
Post by: jim351 on 04 June 2009, 20:28:23

Hi, i have just scanned my 2.6 and code P1625 has come up, can anyone tell me what it means? also the fuel trim code on both banks comes up too, it sounds like the drivers side Cat has broken up and part of it is in the middle box would this cause the fuel trim codes?  after running the car up the road for about 20 mile the Exhaust emission light comes on too...

Title: Re: Help with a fault code...
Post by: Andy B on 04 June 2009, 20:32:02

Quote

Hi, i have just scanned my 2.6 and code P1625 has come up, can anyone tell me what it means? also the fuel trim code on both banks comes up too, it sounds like the drivers side Cat has broken up and part of it is in the middle box would this cause the fuel trim codes? 

Fault codes for 2.6 are here http://www.omegaowners.com/forum/YaBB.pl?num=1220619696 but i can't see 1625  :-/

Title: Re: Help with a fault code...
Post by: jim351 on 04 June 2009, 20:35:21

yeah i look at that and was surprised not to see it there, someone must know

Title: Re: Help with a fault code...
Post by: jim351 on 05 June 2009, 08:15:04

any idea's anyone?  :)

Title: Re: Help with a fault code...
Post by: TheBoy on 05 June 2009, 08:41:47

is it an auto? If so, get the autobox codes read ;)

Title: Re: Help with a fault code...
Post by: jim351 on 05 June 2009, 23:31:24

yeah its an auto, i take it tech2 sorts it out, i have access to the software but dont have the cable, do the cables you can get off flebay work or are they a waste of money?