Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: chuftsmv6 on 07 June 2009, 01:18:03

Title: engine hesitating slightly on gearchange
Post by: chuftsmv6 on 07 June 2009, 01:18:03

hi there my omega seems to hesitate slightly on gear changes is this normal on omegas im not sure ive only owned one and it cuts out sometimes when i give it some stick and stop at junctions if anyone could help that would be fantastic ive always wondered for a while now if its normal with omegas its a3.0mv6 1998 with 89000 on the clock that i converted to manual about 18mths ago thanks :) :)

Title: Re: engine hesitating slightly on gearchange
Post by: feeutfo on 07 June 2009, 01:24:20

any codes?

Title: Re: engine hesitating slightly on gearchange
Post by: chuftsmv6 on 07 June 2009, 01:25:13

hi no codes ive had it all checked :)

Title: Re: engine hesitating slightly on gearchange
Post by: feeutfo on 07 June 2009, 01:31:41

weeell, could be icv stalling at stand still, and if the revs drop enough during gear changes, could it be stalling momentarilly then being bump started when you let the clutch up again....maybe?


by the way, you,re aware of the paper clip test to flash your own engine codes out?

Title: Re: engine hesitating slightly on gearchange
Post by: chuftsmv6 on 07 June 2009, 01:37:56

 whats the paper clip test and the icv thingy  :-? :)