Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: DaviesEB on 08 June 2009, 09:05:40

Title: Find this
Post by: DaviesEB on 08 June 2009, 09:05:40

Vauxmad has offer me a transponder Chip and key. Question is can this solve the problem that i am experiencing??????

Title: Re: Find this
Post by: tunnie on 08 June 2009, 09:15:52

and what problem is that?

Title: Re: Find this
Post by: DaviesEB on 08 June 2009, 09:27:01

When you switch ignition on the EML flashes. Paperclip showed that immobiliser not working.
I am told  chip dropped out of key. Car does not start.

Title: Re: Find this
Post by: dbug on 08 June 2009, 16:06:07

Yes - but it has to be programmed to car (Tech2) ;)

Title: Re: Find this
Post by: markey mark on 08 June 2009, 16:25:41

no you will need ecu chip and transponder  :(

Title: Re: Find this
Post by: DaviesEB on 08 June 2009, 17:08:27

So i can still buy stuff from Vauxmad??? Or better still wait for the Vauxhall Dealer.
Cheers
Bright

Title: Re: Find this
Post by: dbug on 08 June 2009, 18:40:08

Quote

no you will need ecu chip and transponder  :(

You sure Mark - I bought a new key blank with transponder for mine, got it laser cut and TB Tech2ed it to the car.  Works fine.

Title: Re: Find this
Post by: markey mark on 08 June 2009, 19:14:49

Quote

Quote

no you will need ecu chip and transponder  :(

You sure Mark - I bought a new key blank with transponder for mine, got it laser cut and TB Tech2ed it to the car.  Works fine.

yes mate check his location no vauxhall dealers were he is and no tech 2s  :( :(

Title: Re: Find this
Post by: hotel21 on 08 June 2009, 21:00:22

Quote

no you will need ecu chip and transponder  :(

Not 100% sure but think it can be done via tech2 however you may need a working chip to read from in the first instance.  Not convinced that you do though.....   ;) 

Title: Re: Find this
Post by: DaviesEB on 09 June 2009, 09:35:18

Thanks at least i feel belonging. Not withstanding where do i find myself with tentatives.

I also remember that the first problem i had was a code 19 along with the immobiliser problem. But when i changed the Crank Sensor i was fine and all worked well. I am thinking first of cahnging the C Sensor and see what next.

All the same why does the EML flashes when ignition is on.

Cheers
 :( :( :(