Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Radar on 10 June 2009, 21:23:15

Title: Manifold Stud Size
Post by: Radar on 10 June 2009, 21:23:15

I can't find previous posts on this but i wanted to confirm the correct manifold stud and bolt size (i know that 2 of mine have sheared). From vauxhall i got the following part numbers:
V0011082413 - M0400D003 Nut
V0024578147 - Bolt - M8x25mm
Can someone please confirm if the above is correct?
Is there a better alternative anyone has used?

Thanks

Edit for future reference:
M8x25 - 2.2 ltr
M8x39 - 2.0 ltr / 3.0 ltr

Title: Re: Manifold Stud Size
Post by: serek on 10 June 2009, 21:32:02

stud m8 x 39 manifold to head cylinder
part nr 90106924

Title: Re: Manifold Stud Size
Post by: Radar on 10 June 2009, 21:49:06

Thanks. Apologies in advance but won't they be too long?

Title: Re: Manifold Stud Size
Post by: serek on 10 June 2009, 21:54:52

have this details from EPC same ones go to vectra B last time when I take them of VX cost 1.20£ ish each

Title: Re: Manifold Stud Size
Post by: Radar on 10 June 2009, 22:00:56

Thanks, it makes me wonder why the dealers come up with different part numbers when they look at their EPC!! I'm sure it's not the first time!!

Title: Re: Manifold Stud Size
Post by: serek on 10 June 2009, 22:04:54

when I went to VX for stud for vectra they say non on stock then I say why dont us of omega shoulde same , and hi check for omega and was on shelf for just different numbers :D

Title: Re: Manifold Stud Size
Post by: Radar on 10 June 2009, 22:07:03

Common sense is something that is not in the training manual!!

Title: Re: Manifold Stud Size
Post by: serek on 10 June 2009, 22:39:43

Quote

Thanks. Apologies in advance but won't they be too long?

yes you right I was look for 3.0 v6 ::) not for 2.2

Title: Re: Manifold Stud Size
Post by: Radar on 10 June 2009, 22:50:08

Thanks for your pm. It was helpful today and also in the future :y

Title: Re: Manifold Stud Size
Post by: serek on 10 June 2009, 22:51:05

Quote

Thanks for your pm. It was helpful today and also in the future :y

you welcome allways happy to help :y

Title: Re: Manifold Stud Size
Post by: JamesV6CDX on 11 June 2009, 00:23:51

"Sachs" studs and nuts from autovaux I find excellent.

80p per stud with nut included  :y

Title: Re: Manifold Stud Size
Post by: Radar on 11 June 2009, 08:56:38

Thanks i can't find them on the web - do you have a part number?