Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: Dave Elite on 12 June 2009, 19:31:22
-
Hello, I fitted new wishbones a few weeks ago, and I put the bolts back the same as I took them off. But after reading a few threads on the subject I think the vertical bolts may be upside down. I have mine with the nut on the top. Can anyone tell me which way up the go? Thanks Dave
-
Hello, I fitted new wishbones a few weeks ago, and I put the bolts back the same as I took them off. But after reading a few threads on the subject I think the vertical bolts may be upside down. I have mine with the nut on the top. Can anyone tell me which way up the go? Thanks Dave
Bolt drops down from the top with the nut beneath :y
-
Always bolt from the top on suspension parts on all cars. It's only logical: in case the nut happens to get loose and drops off the bolt remains in place and you still have your wishbone / any other suspension part attached to your car.
However, it does not make any difference other than that.
-
I must learn to type faster :D
-
Always bolt from the top on suspension parts on all cars. It's only logical: in case the nut happens to get loose and drops off the bolt remains in place and you still have your wishbone / any other suspension part attached to your car.
However, it does not make any difference other than that.
I beleive it can be an MOT failure :-/
-
I've got mine upside down then :-[ . What about the horizontle bolt? thanks for the help by the way
-
I've got mine upside down then :-[ . What about the horizontle bolt? thanks for the help by the way
Just trying to recall, I think nut towards rear of car, can someone confirm please?
-
Was on mine .. so replaced in the same manner ... :)
-
See also:
http://www.omegaowners.com/forum/YaBB.pl?num=1152986949/
-
Thats a good how2, I'll change them round at the weekend. Thanks for all the help.
-
Thats a good how2, I'll change them round at the weekend. Thanks for all the help.
Make sure you torque them up under load :y
-
Will do :)
-
I've got mine upside down then :-[ . What about the horizontle bolt? thanks for the help by the way
Horizontal bolt with nut to rear. Well, that's the way I refit them.
Never actually noticed how they were originally ::)
-
Thanks