Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: GEDFORDM6 on 03 July 2009, 10:29:15

Title: Door removal
Post by: GEDFORDM6 on 03 July 2009, 10:29:15

Hi,I have searched through topics but cant find anything on door removal.I need to replace the drivers front and rear on my 2.6 CDX due to damage.I found an article on door card removal and would like some top tips on door removal if poss, especially hinge pins.Thanks in advance,Ged..

Title: Re: Door removal
Post by: unlucky mark mv6 on 03 July 2009, 11:18:56

Not much to say really mate,undo check strap,drive out pins,and disconnect wiring plug.In the past when i have removed a door i made my own drift to drive out pins. :y

Title: Re: Door removal
Post by: Entwood on 03 July 2009, 11:30:26

'Elf & Safety Warning ... :)

The doors are bloody heavy ... have someone with you to support them as you remove the pins, better still use some timber and a trolly jack to take the weight !!!

If you drop one on your toes you'll know it !!!!

 :D :D :D :D

Title: Re: Door removal
Post by: unlucky mark mv6 on 03 July 2009, 11:41:36

Quote

'Elf & Safety Warning ... :)

The doors are bloody heavy ... have someone with you to support them as you remove the pins, better still use some timber and a trolly jack to take the weight !!!

If you drop one on your toes you'll know it !!!!

 :D :D :D :D

Oh yes,forgot to mention that one entwood.Cheers mate. ;D :y