Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: jonnycool on 09 July 2009, 11:36:57

Title: Crank sensor replacement
Post by: jonnycool on 09 July 2009, 11:36:57

I've just got a new crank sensor for my car, a 2001 2.6 estate. I've looked at the crank sensor replacement section on maintenance and the plug end is supposed to be at the back of the engine near the big 8-pin connector as per the photo, but I can't see it. I can see the 8-pin but not the smaller 3-pin one for the crank sensor. Is it in the same place on the 2.6's or is it slightly different to the V6 on the maintenance photo?

Title: Re: Crank sensor replacement
Post by: Lazydocker on 09 July 2009, 11:40:57

It'll be there but needs a bit of hunting for :y :y :y

Title: Re: Crank sensor replacement
Post by: jonnycool on 09 July 2009, 11:44:21

Ok ta, ain't the easiest place to go hunting!

Title: Re: Crank sensor replacement
Post by: jonnycool on 09 July 2009, 11:54:47

Nah, still can't find it, I'll have to get the scuttle off, didn't want to have to do that as well, it'll have to wait for the weekend now  >:(

Title: Re: Crank sensor replacement
Post by: Lazydocker on 09 July 2009, 12:09:13

Must confess I pulled the Plenum off when I did mine ::) ::)