Omega Owners Forum

Omega Help Area => Omega General Help => Topic started by: Anthony on 16 July 2009, 16:01:37

Title: Another fault code
Post by: Anthony on 16 July 2009, 16:01:37

ok so i just done my first read out and got these codes:

12
144
145
31

i think that 12 and 31 are normal but not sure about 144 and 145.
i didn't have my car running and it is a 3.0 v6 1996

have i got anything to worry about?

Many thanks

Anthony

Title: Re: Another fault code
Post by: dbug on 16 July 2009, 18:59:35

12 & 31 normal if engine not running.

144 No immobiliser signal recived - Faulty unit or break in wiring
145 Incorrect immobiliser signal received - Faulty unit or break in wiring

Were you reading codes because your car won't start or has a problem?

Title: Re: Another fault code
Post by: Anthony on 17 July 2009, 10:01:26

Quote

12 & 31 normal if engine not running.

144 No immobiliser signal recived - Faulty unit or break in wiring
145 Incorrect immobiliser signal received - Faulty unit or break in wiring

Were you reading codes because your car won't start or has a problem?

i have a problem with the OSR door but nothing else just checking there was no other problems.

Thanks

Anthony

Title: Re: Another fault code
Post by: TheBoy on 17 July 2009, 10:37:08

the 14x ones can be ignored - old codes stored, they seem not to clear.

Title: Re: Another fault code
Post by: MutantCav on 17 July 2009, 10:38:45

Retry it with the engine running mate :y

Title: Re: Another fault code
Post by: TheBoy on 17 July 2009, 10:43:23

Quote

Retry it with the engine running mate :y

Why?  The car runs, so the 31 isn't an issue.

Title: Re: Another fault code
Post by: Anthony on 17 July 2009, 12:50:49

Cheers guys :y :y :y :y :y :y :y :y :y

Thats the best news i've had for a while

Anthony