Omega Owners Forum
Omega Help Area => Omega General Help => Topic started by: jas200 on 20 July 2009, 16:06:10
-
hello im am going to replace the s.a.i. valve which sits at the front right handside of the engine,however ive noticed that as well as the main pipe going in to it on the right,there is also meant to be a pipe coming out the left.
can anyone tell me where the pipe is supposed to lead to?
thanks,j
-
one goes to pump, other goes to one way valve in front of engine.
-
thanks for the prompt response, could you tell me where about on the engine front the pipe goes,as i couldnt see much and my torch has just died.
cheers j
-
There should be a metal pipe running right across the front of the engine as you look at it. This then has a large "cylinder" (which is the one way valve) going up to one of the pipes you mentioned in your original post. :y
-
thanks for the prompt response, could you tell me where about on the engine front the pipe goes,as i couldnt see much and my torch has just died.
cheers j
v6 or 2.0l?
-
thanks for the prompt response, could you tell me where about on the engine front the pipe goes,as i couldnt see much and my torch has just died.
cheers j
v6 or 2.0l?
Good point. I just assume that everyone has a V6 for some reason! ;D ::) ::)
-
thanks for the prompt response, i've found the one way cylinder and the pipe comes from the top of this and runs in to the right hand side of the s.a.i. valve, there is a pipe on the other side of the s.a.i. valve, but i still cant find where this goes.
sorry if it appears that im asking the same question, im just starting to learn about engines
thanks again j
cheers j
v6 or 2.0l?
Good point. I just assume that everyone has a V6 for some reason! ;D ::) ::)